ข้อความโดย: นิก เวนโต้94
« เมื่อ: เมษายน 08, 2013, 04:44:57 pm »
งั้นเอาข้อมูลการ reset ระยะเวลา inspection ไปก่อน เป็นข้อมูลที่ผมคัดลอกมาจากข้อมูลที่พี่อนุรัตน์เคยทำไว้นานแล้ว และเพิ่ม Version ภาษาปะกิตที่ผมลอกมาจาก Manual ของ Golf3/Vento
ส่วนการจัดหมวดหมู่คงต้องรบกวน ฯพณฯ เวบมาสเตอร์แหละครับ
ในสภาวะปกติ เมื่อเราบิดกุญแจเตรียมสตาร์ทรถ จะเห็น code "INOO" แสดงขึ้นมาบนหน้าปัทม์ ซึ่งบอกว่ารถของคุณยังไม่ถึงกำหนดการเข้ารับ service แต่เมื่อไหร่ก็ตามที่เกิดมี code แปลกหน้าแปลกตาขึ้นมา ท่านทราบหรือไม่ว่ามันคืออะไร มาดูกันครับ
* OEL หมายถึง Oil change service ว่ากันง่ายๆ คือได้เวลาเปลี่ยนน้ำมันเครื่องนั่นเอง
* INO1 หมายถึงได้ถึงกำหนดการ service ทุกๆระยะ 30,000 กม.
* INO2 หมายถึงได้ถึงกำหนดการ service ทุกๆระยะ 60,000 กม.
code ต่างๆเหล่านี้เป็นเพียงการเตือนผู้ใช้รถเพื่อเตรียมเข้ารับการฟัน เอ๊ย...การ service จากศูนย์บริการเท่านั้น ไม่ได้เกี่ยวข้องกับการทำงานของเครื่องยนต์แต่อย่างใด ดังนั้น เมื่อท่านทำการ service รถด้วยตัวเองแล้ว (เข้า style "Do It Yourself หรือ DIY ของเราพอดี) ท่านก็สามารถ Reset ไม่ให้ code เหล่านี้มากวนสายตาเมื่อจะสตาร์ทรถได้
ขั้นตอนการ Reset มีดังต่อไปนี้
1. บิดกุญแจไปที่ตำแหน่ง ignition on แต่ไม่ต้องสตาร์ทรถ
2. กดปุ่มที่ใช้ set ระยะทาง ทางด้านขวามือของหน้าปัทม์ โดยกดค้างไว้
3. บิดกุญแจกลับไปที่ตำแหน่ง off แล้วปล่อยมือจากปุ่ม set ระยะทางนั้น จะสังเกตเห็นว่ามี code "OEL" โชว์อยู่ เมื่อกดอีกครั้งจะเป็น "INO1" และ "INO2" ตามลำดับ
4. เมื่อจะ Reset ที่ code ใด (หลังจากที่เราทำการ service รถเราเรียบร้อยแล้ว) ให้กดปุ่มด้านล่างบนหน้าปัทม์ทางด้านขวามือ (ซึ่งตามปกติแล้วจะเป็นปุ่ม set นาฬิกา) โดยกดค้างไว้สักครู่จนเห็นสัญลักษณ์ " - - - - " ขึ้นมาแทน ซึ่งแสดงว่า Service Riminder Indicator ได้ถูก Reset เรียบร้อยแล้ว
5. เพื่อให้แน่ใจว่าเรา Reset ได้ถูกต้อง เมื่อบิดกุญแจไปที่ตำแหน่ง ignition on จะมี code "INOO" ขึ้นมาแทน
ถ้า Resetแล้ว เราก็สามารถ PROGRAM เองได้ด้วยนะครับ เช่น จะให้ IN 02 show ตอนใหน (KM) ค่าที่ตั้งจากโรงงาน 15,000
ตาม
PROGRAMMING THE SETTINGS OF THE VARIOUS SERVICE COUNTERS.
It is possible to program the current settings you want for the counters.
This used if the speedometer console is replaced or if you want to set your
intervals to a shorter value than the factory. For example, you can set the
computer to display OEL after only 3000 miles.
1. Turn on the ignition (do not start the car)
2. Depress the trip-reset button on the odometer.
Also depress the button to set the MINUTES of the digital clock (lower one).
3. The LCD display should read "OEL 1,S", where the S indicates SET.
4. Using the trip-reset button, you can call up the following counter banks
for the service intervals in sequence:
OEL 1,S - distance counter for oil change (ie 7500 miles normally)
OEL 2,S - time counter for oil change (ie 12 months)
IN 01,S - time counter for yearly service interval (ie 12 months)
IN 02,S - distance counter for special service (ie 15,000 miles )
5. Using the button for setting the MINUTES on the digital clock (lower one),
you can display the value of the counter. Repeated pressing of the button will
select a subsequent lower value of the counter and at the lowest level, it will
reset to the highest level and begin to decrease again. The step sizes are
blocks of miles (500 miles, I think) and months (the time setting for the
yearly service is a bit strange as I think it can be set to 1,2,3,4,5 or 6.
Maybe it counts in 2 month blocks? Does anyone know?).
6. Once you have set each counter to the value you want, turn off the ignition.
7. Work is done.